Call us @ 847-741-4500 24/7

• Solid-state switching
• No more burned up points or sticking relays
• Easy installation via screw terminal blocks
• Fits in OEM location between pinsetters

Product ID: BTC-S1/ACC. . . .$340.00

• Solid-state switching

• No more burned up points or sticking relays

• Easy installation via screw terminal blocks

• Utilizes original accelerator/booster chassis to save you money

Product ID: BTC-S1/ACC/KIT. . . .$225.00

• Solid-state switching

• No more burned up points or sticking relays

• Easy installation via screw terminal blocks

• Ball lift motor control chassis can be custom made for any application

Product ID: BTC-S1/BRC. . .Prices start $330.00

• Solid-state switching

• No more burned up points or sticking relays

• Easy installation via screw terminal blocks

• Utilizes original chassis to save you money



Product ID: BTC-S1/BRC/KIT. . . .$225.00

• Diagnostic LED's shows power, optic alignment, ball detect, cycle start, block out switch closure, and bypass switch mode

• Informative PC board layout

• D-sub type connectors for optics, machine hook up and auto score interface

• Optional (AUTO) unlimited auto score interface

• And much more!!!
• Please specify what type of pinsetter and auto score you have when ordering

Product ID: BTE-S1. . . .$425.00

Product ID: BTE-S1/AUTO. . . .$460.00

​

• Requires some type of electronic triggering
• Allows you to utilize the quick rake drop feature on your A-2 Pinsetter
• RTSA mounts to the OEM rake lift shaft (Shotgun)
• Utilizes 24VAC solenoid no special power supply needed just use the 24VAC from the pinsetter

Part ID: RTSA. . . .$225.00

• Converts BRC's Astro Tele Foul to infrared

• Diagnostic LED's shows alignment of optics

• Easy installation utilizes the same foul unit

• Shock protection circuitry

• Durable TTL technology​

Product ID: AFC-1

Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Diagnostic LED's shows power, optic alignment, foul detect, fuse error
  and bypass switch mode

• Informative PC board layout

• Unlimited auto score interface

• Optional (W/PK) power pack if you don't have high voltage up front at foul line

• And much more!!!
• Please specify what type of pinsetter and auto score you have when ordering

Product ID: BTS-S1. . . . $435.00

• Diagnostic LED shows alignment of optic

• Easy installation uses universal power cord

• Shock protection circuitry

• Durable TTL technology

• M-1 designed to fit under single lane small division cover

• Optional (W/PK) power pack if you don't have high voltage up front at foul line

• Please specify what type of pinsetter and auto score you have when ordering

Product ID: M-1
Product ID: M-1 W/PK

Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Diagnostic LED's shows alignment of optics
• Easy installation uses universal power cord
• Shock protection circuitry
• Durable TTL technology
• M-2-B designed to fit under small division cover
• Optional (W/PK) power pack if you don't have high voltage up front at foul line
• Please specify what type of pinsetter and auto score you have when ordering



Product ID: M-2-B
Product ID: M-2-B W/PK

Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Works with 86 Scanner, CCD Camera, GS-X
• Works with Vector Scoring 12VDC (-V)
• Diagnostic LED shows alignment of optic

• Easy installation uses OEM connector

• Shock protection circuitry

• Durable TTL technology

Part ID: IR OPTIC. . . .$105.00
Part ID: IR OPTIC-V. . . .$110.00

• Works with 86 Scanner, CCD Camera, GS-X
• Works with Vector Scoring 12VDC (-V)
• Diagnostic LED shows alignment of optic

• Easy installation uses OEM connector

• Shock protection circuitry

• Durable TTL technology

Part ID: IR OPTIC2. . . .$200.00
Part ID: IR OPTIC2-V. . . .$210.00

​

• Easily accessible high voltage terminal strip with protective cover
• Informative PC board layout
• 25 amp. magnetic clutch bridge rectifier
• New hi-tech time delay module (TDM-X)
• Or use our (BTSSR-D) Solid-State Relay instead of a TDM-X
• 40 amp. main power contactor
• Easily accessible low voltage terminal strip
• Informative PC board layout
• New and improved LED Diagnostic display for machines power, reset and switch functions.
• New D-Sub connector for (BTDDM-1/C/BT)
• All chassis connections are made with OEM receptacles

Product ID: BRC-CH-A2

Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Easy installation no high voltage wiring in the machines electrical box or channel
• Turns off the motor when the machine is not being used by the bowler
• Completely safe for motor
• Soft starts motor to prolong life
• Adjustable time delay from 3 to 5 minutes
• Mechanic's push button to start machine motor running
• Eliminates the unnecessary wear and tear of the pinsetter
• Will save on electricity that would have been needlessly wasted
• As a bonus shuts down accelerator/booster and ball lift motor for added savings Product ID (PS-1-AS)​​
• Please specify the voltage of the pinsetter and if they're American or Japanese pinsetters when ordering.

Product ID: PS-1. . . .$400.00

Product ID: PS-1-AS. . . . $425.00

• Solid-state switching (double pole)

• No more burned up points or sticking relays

• Easy installation
• Outlast any points relay
• Use as a "A" reset relay or "A-2" motor start relay
• Now use to replace "A-2" Time Delay Module

Part ID: BTSSR-D. . . .$90.00

Part ID: BTSSR-DTDM. . . .$90.00

• Solid-state switching (triple pole)
• No more burned up points or sticking relays
• Easy installation
• Use as a "A" motor start relay
• Outlast any points relay

Part ID: BTSSR-T

​
Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Diagnostic LED's shows TDM-X's power, reset and 2nd ball functions
• Time delay adjustable from (0 to 6 seconds)
• Input and output short protection
• Solid-state high voltage switching (no more burned out points)
• Automatic block out function only allows machine to trigger once per cycle

Product ID: TDM-X. . . .$160.00

• Lets the mechanic know instantly why the blackout condition occurred so it can be corrected quickly
• Diagnostic LED's shows functions of the deck jam, turret jam, managers, masking & rear switch
• Diagnostic LED's shows if machine is running in a normal condition or if an error has occurred
• Easy installation, mounts on top of the existing machine chassis Eliminates the unnecessary changing of relays, switches and transformers due to unsure blackout conditions
• BTDDM-1/C/BT is for the Bowl-Tronics BRC-CH-A2 replacement chassis



Product ID: BTDDM-1/C

Product ID: BTDDM-1/C/BT

Currently unavailable:

This product it is currently unavailable. That includes all parts for this product. If you have any questions please don't hesitate to contact us.

• Replaces the old selenium rectifier with a 35 Amp Silicon Bridge Rectifier

• Simple installation wire connectors and mounting hardware included

Part ID: BRIDGE W/CAP. . . .$40.00

• Replaces the old screw type 3.2 amp low voltage fuse

• Re-settable breaker no more changing fuses

• Simple installation wire connectors and mounting plate included

Part ID: BRK-3. . . .$30.00

• Re-settable breaker to protect your pinsetter motor when your motor doesn't have one
• Simple installation crimp style wire connectors and panel mount breaker



Part ID: BRK-15. . . .$30.00